Mylex eXtremeRAID Installation Guide download pdf (Page 46)

Global Array Manager (GAM) Client

3-6 eXtremeRAID 3000 Installation Guide

Global Array Manager (GAM) Client

The controller can be configured using Global Array Manager Client. GAM

Client can also be used from the server or a system client to monitor status

and verify data integrity of disks connected to the controller while the system

and disks are running.

For details on how to install and run GAM Client, refer to the Global Array

Manager Client Software Installation Guide and User Manual.

In Case of Problems

If problems are encountered during start-up, check the following (the SCSI

reference is to be considered for the internal SCSI channel only):

• Check cable length. This includes internal bus lengths in enclosures.

• Check SCSI cabling for loose connections, pin mismatches (make sure

pin 1 on the cable matches pin 1 on the connector), bent pins, and

damaged or crossed cables.

• Check termination (only applies to the one SCSI channel).

• Check SCSI IDs on the drives connected to the SCSI channel.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 89 90

No comments

Mylex eXtremeRAID Installation Guide Page 46