Mylex eXtremeRAID Installation Guide Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Controller Start-up
775013 4-7
Operating System
If an operating system is not already installed on the system, it can be
installed on a system disk on the controller. The operating system is installed
along with the operating system device drivers.
Operating System Device Drivers
Device drivers that are compatible with the controller can be found in the
Software Kit. For details on how to install and load drivers, refer to the
DAC960 Software Kit Installation Guide and User Manual (P/N 771929).
Global Array Manager (GAM)
The controller can be configured using GAM. GAM can also be used from
the server or a system client to monitor status and verify data integrity of
disks connected to the controller while the system and disks are running.
For details on how to install and run GAM, refer to the Global Array
Manager Client Software Installation Guide and User Manual
(P/N 771961). This manual can be downloaded at no cost from the Mylex
web site (www.mylex.com).
In Case of Problems
If problems are encountered during start-up, check the following:
Check SCSI cabling for loose connections, pin mismatches (make sure
pin 1 on the cable matches pin 1 on the connector), bent pins, and
damaged or crossed cables.
Check cable length. This includes internal bus lengths in enclosures.
Check termination.
Check SCSI IDs on all drives.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

Comments to this Manuals

No comments