Startup & Navigation
Manual No. 771961 3-7
3. Item #3 is the server selection box. Workstation Array Manager does
not allow access to remote servers, so this box is read-only and
contains the entry LOCAL_SERVER. The server selection box is used
only in GAM Client.
4. Item #4 is the WSAM controller selection box. When selected, the box
displays the controller ID (C-0, C-1, etc.) and controller type (BT-952,
DAC1164P, etc.) of each SCSI HBA and PCI/SCSI or External RAID
Controller connected to the local server. For External RAID Controller
duplex pairs, a double-pointed white arrow connects the controller pair
selections.
The Controller View Window
5. Item #5 in Figure 3-2 is the Controller View for the controller selected
in the controller selection box. WSAM opens with the controller view
of controller C-0 displayed by default. The controller view displays
controller channels, physical devices, and logical drives. See Chapter 5
for additional information.
Components of the Log Information Viewer
6. Item #6 in Figure 3-2 is the WSAM Log Information Viewer. Each line
in the Log Information Viewer identifies a single event (error, status,
warning, etc.) which was noted during monitoring by the local server
and was transmitted to WSAM. Relevant details accompany the event:
• Event ID. Displays an icon showing whether the event is
informational, cautionary, a warning, etc., plus the identification
number assigned to this event
• Severity. The severity level of this event
• Source. The source is always the local server. This column is blank.
• Source Time. Day of the week, month, day of the month, time of
day, and year on the local server when this event occurred
• Device Address. Relevant channel/target activity and other data
pertaining to why this event posted
• Description. Text of the message describing what occurred
• Sequence (Seq). Number representing where this event fell in a
sequence of possibly related events
• Local Time. For WSAM, usually the same as Source Time.
Comments to this Manuals